With my kitchen remodel close to being done (just some trim pieces and flooring to fix up) its time to get back to the end tables. Been too long. With the tables all assembled and ready, it was time to start the finishing process. I like to start with a “sealer coat” of 50% Clear, […]
Back in the shop – finally! Read More »
Sorry for the slow amount of posting. Been working on some home-related items (I am putting in a new kitchen in the house, including cabinetry, plumbing & electric). Shop time has been cut back, but I still need to keep making progress on this. So I’ve got the upper and lower shelves completed (milled, glued
With the base frames complete, its time to get some additional wood for the table tops and lower shelves. So its time to visit the lumber yard. The dimensions of the top of 22-1/2” x 16-1/2”, with the bottom shelf being 20-5/8” x 14-7/8”. So I’m going to need a minimum rough cut of 24×18
Visit to the lumber yard Read More »
Work on the end tables continue. With the base pieces cut, milled and prepped, and the joinery done (mortise and tenon) it was time to assemble. Glued the pieces together, clamped them up and got them both completed. Had to take a trip for work this week, so didn’t get a chance to keep working.
Continuing on with the end tables. I’ve got the joinery for the sides (legs, rails, stiles) cut and partially glued up. I don’t want to finish the glue up until I get the front & back pieces milled and the joinery cut for them. Once that is done, I will be able to do a
So on to the next project, a pair of Craftsman end tables. They are going to be made out of quartersawn white oak, and measure 18” wide x 24” deep x 23-1/2” high, with a drawer in the front and a lower shelf which can hold a basket to pull out. First step is to
Next Project – End Tables Read More »
At the farmer’s market, I had a visitor ask me if I could do a repair of one of their kitchen drawers. Apparently it was falling apart, and they had tried gluing and screwing it together, but it kept falling apart. I asked him to bring it around and I could take a look. He
Another Interesting Commission – Kitchen Cabinet drawer Read More »
A customer had a need to add a small upper cabinet in their half-bath downstairs, and they had an heirloom box that they wanted to use for it. The problem was that the box bottom was too thin to support any sort of fasteners going into the wall and holding it up. I was able
Interesting commission work Read More »
I received a commission at the last farmer’s market that I attended. A local vendor, Kathy Steinfeld from Controlled Burned Designs, wanted a small tabletop for her sewing table (36″ x 20″). I was able to take on the work, and just got started with the build. Its going to have breadboard ends to help
New Commission – Custom table top Read More »
