Took the opportunity during the week to rip down some of my hardwoods (Walnut, Maple, Cherry, Purple Heart) into strips, glue them up and create laminated charcuterie/cutting boards. Process is somewhat similar to the end grain, but we skip the second step where we expose the end grain. Still the effect is striking, with the …
End grain Charcuterie/Cutting boards are built to stand up to heavy use for many years. If you imagine wood as a series of straws running in a line, the end grain cutting board would be like setting a basket of straws up on their ends, compressed together. As you cut with a knife, instead of …
A simple two-piece holder that can be kept or shipped flat, then slide the two pieces together.
Simple Carrying Tote Wanted to further test my hand tool skills, and thought that building Paul Sellers Carrying Tote Project (https://woodworkingmasterclasses.com/videos/carrying-tote-project-info/) would be an excellent opportunity to try it out. This could be used for the Garden, for woodworking tools, for toys, or anything else someone want to “tote” around. Utilized “off the shelf” wood …
I wanted to make a simple tool tote to see how it might go together easier for potential students. In this case I built the “I can do that” tool tote from Popular Woodworking, with a few small changes: https://www.popularwoodworking.com/projects/i-can-do-that-tool-tote/ First step is to mill the wood to dimension (length & width). Going to stick …
Simple Pencil box, but not as easy as you think…. Tools Required: Materials: Steps: Now use the pieces to make a pencil mark on each for the depth of the dovetails I cut “tails first” when I make dovetails. So you lay them out with a dovetail marker or bevel gauge, going in ½” from …
A customer was looking for a coat hanger with a shelf above for their entryway, with specific dimensions for it (44” long) and couldn’t find one online that would match what they needed – so they approached me. They had a design based on a few pictures in etsy, so I was able to sketch …
With all the assembly done, including the lid, it was time to finish the box. I wasn’t sure whether I would keep it for use, or give it as a gift, so I wanted to apply a finish that someone else could alter without too much trouble. I chose to use dewaxed shellac, as this …
So time to finish the lid. After screwing in the hinges into the box dados, you take the box and put it up on supports/blocks that are the same height as the box. The rough box lid is cut larger than needed. You then screw in one screw per support, then test the fit. Mark …
